Skip to main content
#
Lake Lanier Propeller
site map
contact
our facebook page

Hours of Operation:

Monday: 8 a.m. - 5 p.m.

Tuesday 8 a.m. - 12 p.m.

Wenesday 8 a.m. - 5 p.m.

Thursday 8 a.m. - 5 p.m.

Friday: Office Closed

Saturday:  By Appointment

Office Closed Monday,Wenesday,&Thursday from 12 p.m. - 1 p.m. for lunch

Drop Off & Pick Up Hours May Very Please Make An Appointment

(After Hours Drop off's will be accepted thru secured drop box )

Customer Shipping Worksheet

All shipping customers please print and fill out the highlighted areas.

 Click photo to print worksheet

Propeller Work Sheet

 Click photo to print worksheet

All anglers when sending in your propeller to us please be sure to print and fill out the custom propeller worksheet. The more information we can gather helps our propeller tech.

OUTBOARD PROPELLER RECONDITIONING
ALL reconditioning is inspected with the Hale MRI
Measured at .5, .7, .9,

 

IF YOU HAVE A HIGH POLISH STAINLESS PLEASE ADD $60 TO THE BELOW PRICE FOR REPOLISH

Diameter Aluminum Stainless Steel
Less than 10" $60.00 $130.00
10' to' 12 3/4" $67.00 $145.00
12 3/4 to 13 3/4 $75.00 $160.00
13 3/4 to 15 3/4 $90.00 $190.00

ATTENTION ADD TO PRICE ABOVE


4 Blade add 25%          5 Blade add 35%
Aluminum Volvo Duo: $300 Set
Stainless Volvo Duo: $500 Set
Stainless Bravo 3: $480 Set

Stainless Bravo 3 Gen 2: $540 Set
Bravo II: $185 (Aluminum) Set $280 (Stainless Steel) Set

Additional charge for welding and Heating

  Pitch change, add $125 MAXIMUM pitch change: plus, or minus 2”
  ALL stainless steel pitch changes MUST have hub Replaced
Cupping
  Modification done during reconditioning $30
  Modify cup ONLY – Stainless $60 – Aluminum $30
 Polishing
  Re-polish during recondition $60
  Polish a non-polished prop during reconditioning $90
  Polish only non-polished prop $150
  Re-polish only (without repair) $125

                                                                             Static Balance During Reconditioning $50                                                                                                    Static Balance only $65                          
Ring replacement $35 - $60  Dynamic Balance Stainless $75
Hub replacement $20 - $200  Dynamic Balance Stainless only $150
** WE DO NOT MAKE THE HUBS; THEREFORE, WE DO NOT Warranty HUBS**

Call For Hub Pricing

For Blueprinting / Lab Finishing go to Custom Work Page
 

____________________________________________________________________________________________

INBOARD PROPELLER RECONDITIONING
 ALL reconditioning is inspected with the Hale MRI .
 
Standard reconditioning pitch tolerance is ISO class I. Measured at .5, .7, .9,

**Dynamic Balancing is included in price **

Diameter

3 Blade

4 Blade

5 Blade

Diameter

3 Blade

4 Blade

5 Blade

12"

$165.40

$206.00

22"

Call For Price Call For Price

13"

$189.40

$248.00

23"

Call For Price Call For Price

Call For Price

14"

$218.00

$293.00

24"

Call For Price Call For Price

Call For Price

15"

$251.00

$312.00

26"

Call For Price Call For Price

Call For Price

16"

$288.00

$360.00

28"

Call For Price

Call For Price

Call For Price

17"

$360.00

$451.00

30"

Call For Price

Call For Price

Call For Price

18"

$415.00

$518.00

19"

430.00

536.00

20"

Call For Price

Call For Price

21"

Call For Price

Call For Price

Dynamic balancing is included in price above
Dynamic Balancing
$3.80 per inch of diameter
ADDITIONAL CHARGE FOR WELDING
ADD 25% FOR EACH OF THE FOLLOWING:

 

       Add 37% for each of the following

- Wide blade / high blade area

- Complex geometry

- Stainless Steel

- Class S

PITCH CHANGES:
  Plus or Minus ½”  +10%
  Plus or Minus 1”  +10%
  Plus or Minus 2”  +25%

DIAMETER CUT DOWN:
  -1/2”  +10%
  -1”  +25%
  -2  +35%

 

________________________________________________________________________________________________________


Lower Unit Skeg & Cavitation Plate Repair

Skeg Repair Starting @
  Without paint $425
  Painting repair area only $465
  Painting complete unit $615


Cavitation Plate Repair Starting @
  Without paint $525
  Painting repair area only $565
  Painting complete unit $715


Skeg & Cavitation Plate Repair Starting @
  Without paint $835
  Painting repair area only $875
  Painting complete unit $990

Additional Options
  Painted with two step paint 35%
  Clear coat 20%
  Complete unit paint stripping with repair $200
  Complete unit paint stripping without repair $325
  Other unit case damage (Priced by job)
  Body work on complete unit $15-$300


 ** Any repair NOT listed call for pricing**

_____________________________________________________________________________

Labor Rates

Prop Shop

$90 Per Hour Net

Welding

$120 per hour Net

(includes materials)

Heating

$100 per hour Net

(Includes Gas)

*** ALL REPAIRS ACCEPTED AT OWNER'S RISK***
***BREAKAGE MAY OCCUR!***

 

Lake Lanier Propeller
7067 Wheeler Road  |  Lula, GA 30554
Phone: 770-271-2171 | Email: lanierprop@yahoo.com

Web design by Make it Loud, Inc. Serving Gwinnett, Suwanee, Buford, Lawrenceville, and the Metro Atlanta area. www.makeitloud.net

Powered by MakeItLoud.net
Web Design Made Simple